Test & Measurement
Part Number:380940
Item No:HKC787
Measure Watts and Current in hard to reach locations • True RMS AC Voltage and Current • DC and AC True Power to 240kW • Highest resolution of any power clamp DMM (10W or 100mA) • 0.9" (23mm) jaw opening • Large 4000 count LCD display • Fast 40 segment analog bargraph • Auto Zero function for DC current • Data Hold, Max/Min recall display • Frequency to 1MHz • Low battery indication • Complete with test leads, 2 AA batteries, and carrying case
Part Number:382075/ 382075-NIST
Item No:HKC786
Measures/Computes/Displays 3 Phase Power on Balanced/Unbalanced Loads • 3-3/4 Digit (3999 count) dual display LCD with Data Hold • 3 phase measurements on both 3 or 4 wire balanced and unbalanced loads • Measures True Power (AC, DC, AC + DC) • Measures Reactive(KVAR), and Apparent(KVA) Power to 1200KW • Display Lead/Lag Current/Voltage phase shift in degrees • Store and recall last five measurements • Basic Measurements: Watts, Volts, Amps, and Frequency • Advanced: KVA, KVAR, power factor, and phase angle • Wide ranges to 1200kW, 600V, and 2000A • Dual dislays: kW & PF, KVA & KVAR, phase-angle & Hz, Volts & Hz, Amps & Hz • Clamp jaws open to 2.2" (55mm) for 1000MCM conductors • Built-in DCA Auto-Zero • Advanced Relative and Min/Max functions • Complete with test leads, carrying case and 9V battery.
Part Number:Fluke 36
Item No:HKC785
AC/DC and True-rms Measurements Now you can do more with one tool. The Fluke Model 36 is a rugged, reliable clamp meter that measures ac and dc current and volts. This versatile clamp meter offers True-rms sensing and MAX Hold for measuring inrush current or maximum load on a circuit. Tapered jaws and slim profile let you get at cables in tight places. Use it for troubleshooting in industrial, commercial, avionics and marine environments.
Part Number:Fluke 31/33
Item No:HKC784
The Clamp Meter of Choice for Adjustable Speed Drive Measurements, with True-rms Crest and Frequency Measurement The Fluke 31 and 33 give accurate True-rms current measurements from 0.3 to 700A max. In addition, the Model 33 captures peak values, up to 1000A, for Crest Factor calculation. Both models measure frequency, so you can use them to determine the output frequency of adjustable speed drives, to set the governor of an engine generator or to detect third harmonic currents (180 Hz) in the neutral of a 3-phase system. The Fluke 31 and 33 are built extra strong to withstand job site abuse. Why True-rms? Electrical professionals today need current clamps that are up to the challenge of accurately measuring harmonic currents caused by non-linear loads. Virtually all electronic equipment falls into this category - PCs, printers, HID lighting, adjustable speed drives, etc. Average-sensing meters can't do the job. They can produce readings that are 30%-50% low. Why? Harmonics cause distorted waveforms, and average-sensing meters can only accurately measure pure sine waves. One measure of waveform distortion is Crest Factor, the ratio of the peak to the rms value of the wave. CF for a pure sine wave is 1.4. Higher CF indicates harmonic currents. Fluke's true-rms Current Masters (Models 32, 31, 33, 36) give correct readings for any wave shape, within the instrument's CF specifications.
Part Number:Fluke 30/32
Item No:HKC783
Rugged, reliable general purpose clamp meters The Fluke Model 30 and 32 Clamp Meters are rugged, self-contained, general purpose clamp meters that measure up to your toughest standards. Use them for troubleshooting industrial, commercial, hospital and residential electrical and HVAC systems. Measure not just ac current, but ac volts, ohms and continuity as well. Tapered jaws allow easy access in crowded junction boxes. Designed for durability, the Fluke 30 and 32 can stand up to tough job site abuse. Drop them from a 6 foot (2 meter) ladder, and they'll still deliver reliable measurements. Built-in overload protection is provided to 600A continuous/600V, meeting UL and TUV certification standards, and both meters have been tested to meet the IEC 61010-1 Cat III 600V safety standard. If you test circuits with non-linear loads such as computers or adjustable speed drives, you need a True-rms meter. The Model 32 measures true-rms ac current to 400A with a crest factor of 3, and 600A with a crest factor of 2.
Part Number:MA 440/460
Item No:HKC782
Twin Display Models MA440 and MA460 • 4000 count LCD display for clamp input and separate 4000 count display for multimeter test lead input • Unique capability to observe AC Current and any other parameter simultaneously, including Amps+Volts (power), Amps+Ohms, Amps+Temperature (MA460) Clamp Meter functions - All models • Autoranging with AC Current, Data Hold and Auto Power Off functions • Max Hold captures 30ms peaks • Compact size allows measurements in tight locations • 1.1" (28mm) jaw size accommodates conductors up to 4/0 AWG MultiMeter functions - All models • Measure AC/DC Voltage to 600V and Resistance to 40M • Wide range Capacitance and Frequency tests • Complete with CAT III test leads, two A76 button batteries (MA400 & MA420), four A76 button batteries (MA440 & MA460), carrying case and temperature probe (MA460) Additional Features Twin Display Models Model MA440: • Provides AC/DC µA measurements with high 0.1µA resolution 5798437920ideal for HVAC applications Model MA460: • Provides type K thermocouple temperature measurements
Part Number:MA400/MA400-NIST/MA420/MA420-NIST
Item No:HKC781
Single Display Models MA400 and MA420 • 4000 count LCD display • Model MA420 with True rms Voltage and Current measurements • Relative zero function Clamp Meter functions - All models • Autoranging with AC Current, Data Hold and Auto Power Off functions • Max Hold captures 30ms peaks • Compact size allows measurements in tight locations • 1.1" (28mm) jaw size accommodates conductors up to 4/0 AWG MultiMeter functions - All models • Measure AC/DC Voltage to 600V and Resistance to 40M • Wide range Capacitance and Frequency tests • Complete with CAT III test leads, two A76 button batteries (MA400 & MA420), four A76 button batteries (MA440 & MA460), carrying case and temperature probe (MA460) Additional Features Single Display Models Model MA400: • Average responding Model MA420: • True rms responding
Part Number:TH433
Item No:HKC780
• Base station5798439283 large LCD displays local Time, Indoor Temperature and % Relative Humidity plus measurements for up to 6 locations using remote transmitters • Measures Relative Humidity from 20 to 90% and Temperature from 32 to 10449840F or 0 to 40C (receiver) and 14 to 12249840F or -10 to 5049840C (transmitter) • Resolution: 1% RH, 0.149840F or 0.149840C • Internal clock with Alarm • Transmitter can be wall mounted up to 90 feet from the receiver • Remote transmitter5798439283 LCD displays time, temperature and % RH • Transmitter sends updated signal every 6 minutes; base station updates every 1 minute • Operates at 433MHz; FCC approved • Ideal for monitoring remote office areas, clean rooms, green houses, storage facilities and refrigeration units • System complete with one base station (includes fold-up stand, 3 AA batteries and AC adaptor) and one transmitter (includes 2 AAA batteries)
Part Number:45160
Item No:HKC777
Ergonomic pocket size housing, large dual LCD Simultaneously displays Temperature and Air Velocity or Temperature and Relative Humidity. Built-in low friction vane wheel improves air velocity measurement accuracy. The thin-film capacitance humidity sensor provides a fast response. Use the Type K input socket for high temperature measurements. Ergonomic pocket size housing with large dual LCD simultaneous display of Temperature and Air Velocity or Relative Humidity Data Hold to freeze the displayed value Records Min/Max readings Built-in low friction vane wheel improves accuracy of air velocity in ft/min, MPH, m/s, km/h, and Knots Built-in precision thin-film capacitance humidity sensor for fast response Built in thermistor for ambient temperature measurements High temperature measurements using Type K thermocouple Defaults to last function when powered off Auto power off 10 minutes after last key is pressed with disable feature Low Battery and overrange indication Complete with built-in Humidity sensor and Vane wheel, wrist strap, and 9V battery. Optional Type K thermocouple probe)
Part Number:444731
Item No:HKC776
• Microprocessor based for fast and accurate measurements • Precision sensors: Resistance polymer sensor (444731) or faster and more accurate Capacitance sensor (444732) • Large LCD (1.2") displays %RH and 49840C/49840F readings simultaneously • Model 444732 combines Dew Point display and two programmable High/Low set points • Min/Max function stores & recalls highest and lowest readings • 49840C/49840F switchable temperature measurements • Auto shut off to save battery life • Data hold freezes displayed value • Optional calibration standards are available for greater accuracy • Complete with built-in stand, probe, carrying case and 9V battery
