Test & Measurement
Part Number:461923/ 461923-NIST
Item No:HKC830
• Laser light source for accurate measurements at long distances • Non-contact measurements from 10 to 100,000rpm • Built-in memory recalls Last/Max/Min value stored • Use reflective marker on object to be measured and point the laser light beam for accurate readings updated every second • Large 5 digit LCD display is easy to read • Up to 6.5 feet (2 meters) measurement distance (depending on ambient light) • Complete with 23" reflective tape, four AA batteries and case
Part Number:461840/ 461841
Item No:HKC827
• Large 5 digit LCD display is easy to read • Built-in memory recalls last MAX/MIN value stored • Autoranging with 0.05% accuracy Contact Tachometer • Contact measurements from 0.5 to 19,999rpm plus linear surface speed measures in ft/min or m/min • Simply contact rotating object with sensor tip and read • Accessory wheels enable tachometer to measure linear surface speeds • Complete with cone tip, flat tip and spare wheel for surface speed measurements, four 1.5V AA batteries and case Photo Tachometer • Non-contact measurements from 5 to 99,990rpm • Use reflective marker on object to be measured and point the integral light beam or accurate readings updated every second • 2 to 6 inches (50 to 150mm) measurementdistance (depending on ambient light) • Complete with 23" reflective tape, four AA batteries and case
Part Number:461830/ 461831
Item No:HKC826
• Checks and analyzes motion and speed by simply aiming and synchronizing it5798439283 flash rate (FPM) with a rotating object • Read RPMs on 4 digit LED display • Duty cycles from 5 to 30 minutes and 1second sampling time • Ideal for measuring the speed of moving gears, fans, pumps, motors and other equipment used in general maintenance, production, quality control or laboratories • High accuracy over a wide, dynamic range via exclusive microcomputer LSI circuit and crystal control time-base • Complete with 6 ft power cord, handle and can be tripod mounted.
Part Number:461891/461891-NIST/461893/461893-NIST
Item No:HKC825
• Large 5 digit LCD display is easy to read • Built-in memory recalls last MAX/MIN value stored • Autoranging with 0.05% accuracy Contact Tachometer • Contact measurements from 0.5 to 19,999rpm plus linear surface speed measures in ft/min or m/min • Simply contact rotating object with sensor tip and read • Accessory wheels enable tachometer to measure linear surface speeds • Complete with cone tip, flat tip and spare wheel for surface speed measurements, four 1.5V AA batteries and case Photo Tachometer • Non-contact measurements from 5 to 99,990rpm • Use reflective marker on object to be measured and point the integral light beam or accurate readings updated every second • 2 to 6 inches (50 to 150mm) measurement distance (depending on ambient light) • Complete with 23" reflective tape, four AA batteries and case
Part Number:461825/ 461825-NIST
Item No:HKC824
• One battery operated meter performs both Tachometer RPM measurement and Stoboscopic speed and motion analysis. • Large 0.4" 5 digit LCD digital display. • Characters on display reverse direction depending on measurement mode you are in. • Non contact Tachometer measurements of 5 to 100,000 RPM • Strobe measurements of 100 to 100,000 RPM/FPM. • Tachometer memory stores last, max and min readings. • Stoboscope coarse and fine flash rate adjustments in three ranges. • 0.1% basic accuracy with 0.1 RPM resolution. • Microprocessor based with quartz crystal oscillator to maintain high accuracy. • Battery operation brings motion analysis to any location Complete with 4-1.5v AA batteries, operation manual and carry case.
Part Number:461950
Item No:HKC823
• Measure RPMs from 5 to 99,990rpm with microprocessor quartz crystal accuracy of 0.05% + 1digit • Resolution from 0.1rpm (5 to 1000rpm) to 1rpm (1000 to 9999rpm) to 10rpm (10,000rpm to 99,990rpm) • Large 4 digit LED display updates once per second (rpm greater than 60) • Unique design permits RPM measurements of a one hole gear or disk eliminating the need for special gears • A pulse is measured when a ferrous object (stud) passes by sensor • Powered by: 115/230 VAC 50/60Hz Dimensions: Bezel: 3.78 x 1.89 x 2.36" (96 x 48 x 60mm) Meter: 3.61 x 3.54 x1.66" (92 x 90 x 42mm) Weight: 13.9oz (397g) Panel cutout: 3.62 x 1.77" (92 x 45mm) • Choice of two sensor pickup types: Proximity sensor designed for target distance of 0.1" (3mm), covers range to 36,000rpm (600Hz); Photoelectric sensor with target distance of 0.4" (10mm) and range to 6000rpm (1kHz); Both encapsulated sensors include 6 ft. (1.8m) cable
Part Number:461501/ 461501-NIST
Item No:HKC822
• Wide range from 10.0 to 99,999rpm • Dual 5 digit LCD for rpm (rev/min) and rps (rev/sec) • Basic accuracy of for Photo Tachometer (non-contact) 498410.1%; Contact Tachometer (with optional adaptor) 498410.04% • Counter mode used to count units on production lines • Measurement distance from 2 to 125798440224for Photo Tachometer • Maximum/Minimum and Average functions • Data Hold and Auto-Off features • Tripod mount for stationary use • Built-in RS-232 interface for data acquisition and analysis • Optional Contact Tachometer Adaptor for linear surface measurements of m/min, ft/min, yard/min • Complete with four 1.5V AA batteries, reflective tape, Windows® 95/98 compatible softwares, serial cable, and case.
Part Number:A2103
Item No:HKC821
An extremely versatile fully featured model, with many more functions and even greater flexibility, this model has a wide selection of practical functions including revs per minute (rpm) and revs per second (rps) both optically and by contact method, contact linear speeds, in feet, yards or metres per minute & per second. Special memory functions include Maximum, Minimum reading capture, employing a uniqe dual timebase for high speed data grabbing.Truly average speed measurement mode is also standard, with Time Interval measurement for reciprocal speeds and Cycle Timing, other features include Revolution Count and Length Count in metres, yards or feet, with Last Reading Hold and auto-memory retention of last selection function mode.
Part Number:A2109
Item No:HKC820
Four types available Two Laser light source versions * Model A2109/LSR for Measurement only * Model A2109/LSR/002 for Measurement and pulse output facility Two LED light source versions * Model A2109/LED for Measurement only * Model A2109/LED/002 for Measurement and pulse output facility The very high level of certification EEx ia IIC T4 - ATEX II 2 G, allows use in a wide range of hazardous environments in petrochemical, Gas & volatile materials processing industries. The Advent Tachometers very comprehensive operational features provide the user with the ultimate in Optical & Contact speed monitoring not previously possible in hazardous areas. Pulse output connections The Pulse output models also have a camera tripod bush fitted as standard, this feature is ideal for 6108135425nds free?applications, for example, continuous monitoring speed of machines, test rig providing easy to set up speed check & recording facilities. Warning The pulse output must only be connected through approved equipment. Pulse output facility
Part Number:A2102
Item No:HKC819
The extra features of the A2102 caters for wider applications, with greater versatility giving more flexibility in use, with the ability to measure rpm optically and by contact method, rpm and linear speed in metres per minute, our unique "Invertor" display feature is also included on this model. The A2102 model has a wide speed range of 3-99,999 rpm, making it ideal for many applications, such as conveyers, textiles, paper, plastic and wire speeds, through the benefit of contact rpm and linear speeds of 0.3-1500.0 metres/min, can be measured, this model has autoranging as standard with a maximum resolution of 0.01 units, last reading hold memory is also standard.
