Oscilloscopes
Item No:HKC651
Speed, performance and analysis power For more demanding applications, the ScopeMeter 190 Series high-performance oscilloscopes offer specifications found on top-end bench instruments. With up to 200 MHz bandwidth, 2.5 GS/s real-time sampling and a deep memory of 27,500 point per input, they're ideal for engineers who need the full capabilities of a high-performance oscilloscope in a handheld, battery powered instrument. This virtual Fluke 190 ScopeMeter demonstrates the capabilities of the product using its user-friendly interface. Dual input - 60, 100 or 200 MHz bandwidth Up to 2.5 GS/s real-time sampling per input Connect & View™ automatic triggering, a full range of manual trigger modes plus external triggering 27,500 points per input record length using ScopeRecord™ mode Automatic capture and replay of 100 screens 24 automatic waveform measurements Cursors, zoom and real-time clock Four hours rechargeable NiMH battery pack 1000V CAT II and 600V CAT III safety certified 1000V independently floating isolated inputs Includes a 5000 count true-RMS multimeter and a TrendPlot™ paperless recorder.
Item No:HKC650
Introducing the Industrial ScopeMeter Test Tool: More Ways to Find The Trouble Fast
Part Number:381265/381265-NIST
Item No:HKC649
Combination Oscilloscope and True RMS Digital MultiMeter Low Cost, Portable size • Oscilloscope graphical functions: Single channel, volts/division (75mV to 500V), Amps/Division (75mA to 15A), 500ns Glitch Capture • High sensitivity allows user to capture low level signals • Oscilloscope Bandwidth: DC to 100kHz with a sample rate of 1 Million Samples/sec • Graphical display of mV, Volts, mA, Amps • Oscilloscope Display: 128 x 64 pixel graphic LCD ( View area 2.8x1.5") • Adjustable trigger level and slope allows user to observe more complex waveforms • MultiMeter Display: 3-3/4 digit (4000 count) LCD with Bargraph and Data Hold • Comparator function with user defined MIN/MAX levels allows the user to perform HIGH/LOW/PASS tests in Voltage, Current, Resistance and Capacitance modes • Logic test function for TTL & CMOS (5V & 3V) • DMM functions: AC/DC Voltage/Current, Resistance, Frequency, Capacitance, dB, Duty Cycle, Pulse Width, Period, Logic Signal, Diode & Continuity tests • Record and Recall MIN/MAX/AVG readings with time stamping • Overrange indication and Auto power off • Store and recall 15 waveforms • Generator output provides 10Hz to 20kHz Logic Level Output • Optional 381264 rechargeable NiCad battery pack and AC adaptor/recharger recommended • Complete with rubber holster, built-in stand, fuses, test leads, alligator clips and six AA batteries
Part Number:381275/381275-NIST
Item No:HKC648
Graphical Storage Oscilloscope & True RMS DMM includes RS-232 interface and PC software • Oscilloscope graphical functions: Single channel, volts/division (150mV to 400V), Amps/division (15A), 500ns Glitch Capture, Pre/Post-Trigger (-4div./+10div.) • Oscilloscope Bandwidth: DC to 100kHz with a Sample rate of 1 Million Samples/sec • Oscilloscope Display: 128 x 64 pixel graphic LCD (View area: 2.8x1.5") • MultiMeter Display: 3-3/4 digit (4000 count) LCD with Bargraph and Data Hold • MultiMeter functions: AC/DC Voltage/Current, Resistance, Capacitance, Frequency, dB, Duty Cycle, Pulse Width, Period, TTL level Generator, Diode and Continuity tests • Built-in RS-232 PC interface • Record and Recall MIN/MAX/AVG readings with time stamping • Generator output provides 10Hz to 20kHz TTL level output • Store and recall 15 waveforms plus setup • Graphical HELP screens explain functions • Over-range indication and Auto power off • Optional inductive pick-up adaptor for automotive RPM measurements to 12,000 rpm. (Distributor type engines) • Optional 381279 rechargeable NiCad battery pack & AC adaptor/recharger recommended • Complete with protective holster, built-in stand, Windows® 95/98 compatible software, RS-232 cable, six AA batteries, fuses, test leads & alligator clips
